measured-state-clause-generator

Measured-State Clause Generator

A nylon dimension quoted without its measurement condition is not an acceptance criterion — it is a number two parties will disagree about later. This builds the drawing note that fixes it, using the designation system already written into ASTM D618, so you are citing a published standard rather than inventing house language. Set the state, tick what the note has to cover, and paste the result into your drawing.

Reference condition

The first three are ASTM D618 designations

Measurement restraint

Free-state and fixtured are different numbers on a low-modulus polymer

Grade family on the drawing

Changes which standard can legally be cited

The note also has to cover

Print the measurement condition on the inspection report itself State that parts ship as-machined, so dimensions in any other moisture state fall outside the specification Name the critical features the condition applies to, rather than the whole drawing Require the conditioning record to travel with the lot Add the direction caveat: swelling is largest through the thickness and smallest along the length

Selected — copy with Ctrl+C or Cmd+C.

Drawing note

What each line rests on

Both ISO 1110 and ASTM D618 are testing standards rather than finished-part acceptance standards, which is exactly why the condition has to be written into the purchase order instead of assumed. This generator produces contract language for you to review; it is not legal advice and it is not a Zhenling acceptance commitment until it appears in a written quotation for your part.

Send the print with this note applied →