Get in touch with Zhenling Company
About Zhenling Metal · Since 2006
We make the parts that isn’t in any catalogue.
Shanghai Zhenling Metal Co., Ltd. machines non-standard components for pressure vessels, oil & gas separation and fluid control. Send a drawing or a sample — we handle material selection, machining, welding and export from our own plant in Jiashan, Zhejiang.
Company data sheet
Plant area
8,000 m²
Established
2006
Workshop
6,000 m²
Exported
80%
Approvals
CE · ASME
Who we are
A trading company with its own machine shop behind it.
Zhenling was founded in Shanghai in 2006 and built its plant in Jiashan, Zhejiang — inside the Yangtze River Delta supply base, where castings, forgings, plate and surface treatment are all within an hour’s drive.
That location is why we can quote non-standard work at a sensible price and still control lead time: raw material sourcing, machining, welding and inspection sit under one roof, and our export team talks to you directly instead of relaying messages through a middleman.
Most of what leaves our workshop is a one-off or a small batch built to a customer print — a replacement roll for a paper line, a valve body in 904L, a flange set that no standard covers. We are set up for that kind of work rather than for catalogue production.
Domestic business
Serves Chinese equipment builders and end users, and keeps our machinists busy on the mixed, short-run work that keeps a shop sharp.
Overseas export
A dedicated export team handling drawings, material certificates, third-party inspection and shipping documents for customers in Europe, North America, Australia and Singapore.
WHAT WE MACHINE
Built to your print, in the size the job needs.
We produce complete machines and their spare parts, as well as individual components across a wide range of sizes and models. Typical work includes:
- 01 Pressure vessels
- 02 Oil & gas separation
- 03 Fluid control
- 04 Process & chemical equipment
- 05 General machinery
FLANGES
Weld neck, blind, slip-on and fully custom patterns, machined from forged or plate stock in carbon, alloy and stainless grades.
ROLLS & ROLLERS
Shafts and rolls turned, ground and balanced for converting, paper, rubber and processing lines — including hardened bearing-steel journals.
BENT PIPES & ELBOWS
Formed and machined pipe sections, transition pieces and spools for process lines where an off-the-shelf fitting will not do.
VALVE BODIES
Bodies, bonnets and internals machined from forgings, castings or solid bar, with pressure-tight seats and sealing faces held to print.
PLUGS & CLOSURES
Threaded plugs, caps, end closures and blanking components for pressure equipment, machined and tested to your specification.
PROFILED & SPECIAL
Odd-shaped, one-off parts reverse-engineered from a sample or produced straight from your 2D/3D files.
Materials Twenty years of chips, across three material families.
Material choice decides whether a part survives its service life. Tell us the temperature, the medium, the pressure and the hardness you need, and we will propose a grade — then supply it with mill certification.
Working in high temperature, corrosive or pressurised service? We offer grade selection support across material classes, matched to your operating environment and hardness requirement — not just a quote against whatever the drawing happens to say.
How an order runs
From drawing to crate.
Every custom job passes the same five gates. You get a named contact at each one.
-
01
Drawing review
We read your 2D/3D files or measure your sample, flag anything unclear, and confirm tolerances and finishes before quoting.
-
02
Material selection
Grade proposed against your service conditions, sourced with mill certificates and traceable to the finished part.
-
03
Machining & forming
Turning, milling, boring, grinding and wire cutting; plate work on CNC shears, rolls and presses.
-
04
Welding & assembly
Submerged-arc and gas-shielded welding, then fit-up of complete assemblies where the order calls for them.
-
05
Inspection & export
Dimensional and pressure checks, documentation pack, export packing and shipment from Shanghai or Ningbo.
INSIDE THE PLANT · JIASHAN, ZHEJIANG
Machines that keep the tolerance, not just the promise.
Our workshop runs equipment matched to current domestic and imported standards, arranged so a part can go from bar stock to finished weldment without leaving the site.
8,000m²
TOTAL SITE AREA
6,000m²
WORKSHOP FLOOR
01
Turning, milling & grinding
- CNC wire cutting (EDM)
- CNC lathes
- CNC milling machines
- CNC grinding machines
- CNC boring machines
- CNC radial drilling machines
02
Multi-axis machining centres
- Multiple 3-axis machining centres
- 4-axis machining centres
- Imported 5-axis machining centres
03
Plate forming
- CNC shearing machines
- CNC plate rolling machines
- CNC presses
04
Welding
- Lincoln submerged-arc welding machines
- High-quality gas-shielded welding machines
Approvals & export
Certified for the markets we ship to.
Zhenling holds EU CE certification and US ASME certification, so pressure-related components can be specified into projects that demand documented compliance.
10,000+
Vessels & parts per year
80%
Output exported
Where our parts go:
- Europe
- United States
- Australia
- Singapore
- Southeast Asia
CE · EU
European conformity for pressure equipment placed on the EU market, supported by the material and inspection records that go with it.
ASME · US
American Society of Mechanical Engineers certification covering pressure vessel work built to US code requirements.
Work with us
We grow by putting our own factory to work for our customers — not by reselling someone else's capacity.
Send the drawing. We'll tell you what it takes to make it.
Quotations typically come back within one to two working days, with the material grade, process route and lead time set out clearly. Samples and reverse-engineered parts are welcome.
![Shop-Floor Carbon Steel CNC Machining Guide [2026]](https://zhenlingmetal.com/wp-content/uploads/2026/08/carbon-steel-cnc-machining-handbook-r2-featured-150x150.png)
